+44 (0)1621 855544

Made in the UK

Menu

NC6054 Local/Remote Programming Accessories for use with Sepura Radio Manager

Available for both STP and SRH radios the NC6054/NC6058 Remote pods are designed to provide remote programming for Sepura TETRA radio terminals.

NC6054 Local/Remote Programming Accessories for use with Sepura Radio Manager

Available for both STP and SRH radios the NC6054/NC6058 Remote pods are designed to provide remote programming for Sepura TETRA radio terminals. The pods use IP addressable units enabling them to be located locally or remote via a private LAN/WAN to the PC running Sepura Radio Manager Software. The Pods also provide charging and have a programing status indicator for each radio. The use of remote programming will soon show an impressive reduction in logistics and management costs associated with in-life terminal management. The pods can be left continuously connected to the Radio Manager to provide a remote 24/7 automatic programming service.

  • No PC required at the remote location
  • Cost saving solution
  • IP addressable unit
  • Charging for each radio
  • Programming Status Indicators for each radio
  • Maximises the use of client software
  • Eases logistics and management of programming
  • Each radio appears as a standard com port on the pc
  • Plug and Play operation
  • Expandable from 4 up to 32 radios for each Sepura radio manager client
  • Optional radio link between the pods and pc if approved for use in your market
  • IEC mains power and RJ45 data connections
  • All units available with wall mount or desk mount options
  • Allows network connections to remain within the security boundaries of the users own LAN/WAN
  • No security sensitive information retained at the Remote Radio Pod

SIZE AND WEIGHT: NC6054 STP/SRH

Wall Mount:
Weight: approx. 5kg

Size: 390mmW

200mmH

160mmD

Desk Mount:
Weight: approx. 5kg

Size: 390mmW

130mmH

200mmD

(Dimensions and weight excluding radio)

POWER REQUIREMENTS:

Input range: 100-240V AC, 47-63Hz

CONNECTIONS:

Power: Fused IEC (3.15A Fuse)

Ethernet port:10/100Mbps (RJ45)

Protection: Note: Requires a static IP address

SERIAL COMMUNICATION PARAMETERS:

Flow control: RTS/CTS, DSR/DTR (for RS-232 only), XON/XOFF

Transmission speed: 50 bps to 921.6 Kbps (110 bps to 230.4 Kbps for NC6050)

Bandwidth requirements: 50Kbytes when programing at 115200 baud rate

If you would like to know more about our TETRA communications solutions

Contact us