Replacement Battery Clip for SRH, SRP, STP and SC radios
The replacement battery clip is made of CS70 carbon spring steel and the finish is a zinc and clear passivate plate to prevent rusting and it will not break. These materials comply with WEEE & ROHS regulations.
The clip is fixed to the battery using 3M 468MP Transfer Tape which is a firm acrylic pressure-sensitive adhesive system. It features high ultimate bond strength with excellent high and low temperature performance and excellent solvent resistance. Bond strength increases substantially with natural aging. Price: £5.00 per clip sold in packs of 10. Minimum order £50.00 +vat
These products are covered by BiTEA’s British Patent No. 2 518 517
1: Remove any remaining broken clip from the battery to make sure it does not stop the replacement clip from fitting snug.
2: Clean the broken battery with the Isopropyl Alcohol Cleaning wipe provided. Please see Safety Data Sheet provided.
3: Peel off the protective tape cover from the BiTEA replacement battery clip.
4: It is essential that the clip is correctly orientated and correctly located. (Very sticky, one go only). The 3m adhesive hardens with age. Please follow the 3m adhesive Application Techniques supplied.
5: Push on firmly and hold in place for about one minute.
6: Battery is now ready for use.
Spec / Data Sheets available on request or from the BiTEA website:
3M 468MP Transfer Tape. ISA Cleaning Wipe
Compatible with: SRH, SRP, STP and SC radios. High and Low capacity batteries.